The DU Lounge

ADC (analog to digital) was fine and worked. Then I decided, I would skip the Analog portion. I downloaded a Function Generator program. Left Channel = Voltage, Right Channel = Amperes, and Frequency = Both Channels. Now ProfessorGAC what am I seeking ? WATTAGE correct? Volts X Amps.
Ok, Left = Volts times Right = Current = POWER
Left X Right = Watts AC as long as the OUTPUT is in the same circuit. Like MIDI files are tiny, I make my programs extremely small. Here is my CODE for "Virtual Electricity" WIRELESS BROADCAST DIGITAL ELECTRICITY. I wrote this as a Command Line Program. You or anyone may COPY/PASTE my code freely. Begin by creating a New Folder in a Storage Area. I use C:> Digital Electric.
1. Open NOTEPAD.EXE
2. SAVE AS Virtual Electricity.bat in the folder Digital Electric
3. Copy/Paste these LINES into Virtual Electricity.bat
@echo off
title Virtual Electricity
:x
powershell [console]::beep(300,9999999)
goto :x
4. SAVE
That wasn't so hard was it?
Close the Notepad Editor
Double Click "Virtual Electricity.bat"
A CMD black window will start
Open Volume Mixer
You should see about 50% green in Sound System slider window
To change the frequency RIGHT CLICK the file "Virtual Electricity.bat"
select EDIT
go to 300, replace with different frequency
click SAVE
Close
Re-open Virtual Electricity it will be at the new frequency
If you hear the file
Congratulations you can now become a Wireless Electrical Power Provider
If you desire to charge people,,, realize you will be competing with OPEN SOURCE that I make freely available.
And ProfessorGAC , my source starts with 2 AC ENERGIES straight out of the Earth, I rectify 2 AC ENERGIES into an UltraCapacitor Matrix consisting of SuperCap Arrays to DC-DC Converter to output power ->Charge Lithium PC Battery>> Run programs involved with Digital Electric's Virtual Electricity.
Use Tesla's One Wire schema and create a cut wire insert NODE Inductor FWBR and Smoothing Cap (ALSO STORES DC) and you may cut insert as many NODES as you desire along the one wire with Alternating Current through it,,, and you may even extend it's length and insert more NODES and AC/DC Full Wave Bridge Rectification , then as before DC-DC Converter to AC Inverter which you may also Amplify as before by having 2 AC Sources.

ProfessorGAC those 2 AC Sources from the Earth are 2 separate Ground Rods and all the cosmic energy striking the Earth 24/7 causing climate upon the face of the Earth. Stars are ALTERNATING Powers also. The AC Energy comes up the Ground Rod #1 upon a copper wire to my washing machine (a grounded appliance) where I have 2 Magnets attached to the metal front. Between (yes between) the 2 Magnets a copper wire is splayed (fanned out) sandwiched between Magnet #1 & Magnet #2 and the other end of this wire is attached to AC Terminal #1 on a FWBR and the other Ground Rod #2 goes to the other AC Terminal #2 on the FWBR then harvest is across DC+/- into a Capacitor. Then DC-DC Converter and charge a battery bank #1 and battery bank #2.
Don't worry about the FWBR to DC efficiency of 70.7% because you can have another CHANNEL running, actually several or many CHANNELS. 2 Channels output = 1.414% = > 1 {i.e. Over 1-to-1 Unity @ static Zero Point) if we Multiply the 2 Channels anything > 0 is in Orders Of Magnitude. Oh yeah I also give control by sliders so you may control how much AMPLIFICATION of the AC1+Magnetic Energy(from between magnets) & AC2 is being ALTERNATED. The amplified alternating power is doubled in frequency and broadcast over internet protocol
HTTPS//this server ID/PORT: 8080
Set for only 40 Connections ----> upon 8080
Each 40 instances running @ 25,000wAC 60Hz 500vAC 50A = 1,000,000wAC * 1 MegaWatt 60Hz
So, that port, 8080 has 1 Meg 60Hz
New port # 8081 can have 1 Meg 60Hz
New port #8082 "" ""
ect. This offsets the efficiency of 70.7% when converted to DC
and ProfessorGAC I broke the laws of physics when I SAVED my AC POWER to Digital Medium which they say "you can't save AC" I saved it in about an hour of uninterrupted POWER on CD ROM
I thought that was the way to go back then, so I saved the wireless broadcast.
Plop the CD ROM in... press LOOP... hit PLAY
and I have other ways to accomplish it better now than when I first endevoured